-
×
Electrically Insulated PVC Tape Black
1 × ₹15.00 -
×
Digital Clock Circuit Kit Using 555 Timer and 4026 IC
1 × ₹475.00
Subtotal: ₹490.00
DIY Kits
Showing 17–32 of 39 results
-
-
Electronic Project Kits
DIY Wireless Power Transmitter Project kit using BD139
Kit Contents
instruction guide
BD139 Transistor 1 1N4148 1 Resistor 10k 1 Copper Wire 22SWG 3M Jumper Wires 3M 170 point Breadboard 2 piezo Buzzer 1 Capacitor (1 pc each) 1uf 100V
470pf
4.7pf
100nfBattery Included No SKU: 247 -
DIY Stuff, Hardware and Tools, Miscellaneous
Electrically Insulated PVC Tape Black
Product specification of Electrical Insulating Tape
- Roll Length: 6M
- Roll Width: 19mm
- Color: Black
- Thickness: 0.180mm
- Adhesion to steel: 250g/19mm
- Adhesion to backing: 250g/19mm
- Elongation: 100%
- Tensile strength: 3.0kg/15mm
- Breakdown Voltage: 5kv
SKU: 795 -
DIY Stuff, Hardware and Tools, Miscellaneous
Electrically Insulated PVC Tape Red
Product specification of Electrical Insulating Tape
- Roll Length: 6M
- Roll Width: 19mm
- Color: Red
- Thickness: 0.180mm
- Adhesion to steel: 250g/19mm
- Adhesion to backing: 250g/19mm
- Elongation: 100%
- Tensile strength: 3.0kg/15mm
- Breakdown Voltage: 5kv
SKU: 886 -
DIY Stuff, Hardware and Tools, Miscellaneous
Electrically Insulated Tape PVC Tape blue
Product specification of Electrical Insulating Tape
- Roll Length: 6M
- Roll Width: 19mm
- Color: Blue
- Thickness: 0.180mm
- Adhesion to steel: 250g/19mm
- Adhesion to backing: 250g/19mm
- Elongation: 100%
- Tensile strength: 3.0kg/15mm
- Breakdown Voltage: 5kv
SKU: 884 -
Arduino Kits
Light and Laser Following Robot Kit with Arduino
Kit Contents:
- Arduino Uno with cable – 1pc
- BO Motors and clamps – 2pc
- Tyres – 2pc
- Chassis – 1pc
- Caster wheel – 1pc
- l293d Motor Driver – 1pc
- Battery – 1pc
- Male to Male Jumper – 10pc
- Male to Female jumper- 10pc
- Single strand wire – 30cm each Color
- 170 Point Breadboard – 1pc
- Nuts and Bolts – 10 sets
- LDR – 2pc
- 9v battery and Battery Connector – 1pc
SKU: 241 -
Arduino Kits
Line Follower Robot Kit with Arduino Uno DIY Robot Kit – Upgraded
Line Follower Robot Components
- Arduino Uno with cable: 1
- IR Sensor: 2
- L293D Module: 1
- Jumper Wires: 20pcs
- Chassis: 1
- BO Motor: 2
- Caster wheel: 1
- Breadboard: 1
- Wheels: 2
- Screws – 5
- Clamps – 2
- 9v Battery with Snap – 2
Guide Included with instructions – Link available in description.
SKU: 244 -
AVR ATmega Kits
Line Following Robot Kit with AVR ATmega DIY LFR Kit
Line Follower Kit Contents
- AVR Atmega16 : 1
- IR Sensor: 2
- L293D Module: 1
- Male to Male Jumper wires: 10
- Male to Female Jumper Wire: 10
- Chassis: 1
- BO Motor with Wheels: 2
- Caster wheel: 1
- Breadboard: 1
Since this line follower kit is with Microcontroller so this is a programmable Robot Kit
Contact Us to get any help in circuit and programming
SKU: 226
