1.3 inch I2C IIC 128×64 OLED Display Module
Product Details
- Display type: OLED
- Size: 1.3 inch
- Outline dimension: 35.5 x 33.5 x 3
- Number of pins: 4
- Header pin: soldered
- Package contains: 1 x 1.3 inch I2C IIC 128×64 OLED Display Module
₹589.00 (ex. GST)
OLED (Organic Light Emitting Diode) display is a self emitting technology and requires no backlight like conventional LCD displays. In the dark environment, its contrast is higher than an LCD display. This display is composed of a thin, multi-layered organic film placed between anode and cathode.
The OLED display is I2C or SPi compatible and can be easily interfaced with any microcontroller. The display has a 1.3 inch diagonal size and has a resolution of 128×64 pixels.
Features
- High brightness
- High contrast ratio
- Slim outline
- Wide viewing angle
- Lightweight
- Wide operating temperature range
- Low power consumption’
- I2C or SPI compatible
- Soldered header pins
- Only needs 2 I/O ports to control
Specification
- Operating voltage range: 3.3V to 5V
- Interface type: IIC or I2C interface
- Controlling chip: SSH1106
- Resolution: 168×64 pixel
- Operating temperature range: -40℃ to 70℃
Based on 0 reviews
Be the first to review “1.3 inch I2C IIC 128×64 OLED Display Module”
Related products
-
Modules
8×8 Dot LED Matrix Display LED Display Module
Product Specifications
- Product type: 8×8 LED matrix
- Chip or IC: MAX7219
- Voltage supply: 3.7-5.3V
- Current supply: 320mA
- Dimensions
- Display: 32mmX32mmx6
- PCB: 50mx32mm
- LED size: 5mm
- Package contains: 1 piece of 8×8 LED matrix and 1 piece of connecting wire
SKU: 206 -
-
-
Arduino
Arduino Uno Prototyping Shield with 170 Point Mini Breadboard
Arduino Uno Protoshield directly fits into an Arduino UNO board and breaks out the I/O pins and makes it an expansion board. It makes it very easy to design any customer circuit. You can directly solder components on the board or connect the circuit using 170 point mini breadboard (included). The board is designed to solder both through-hole and SMD components to test them with your Arduino board. Although the SMD area is designed for 24 Pins SOIC integrated circuit and has a lot of space for TH components.
Features
- It has a standard 0.1” x 0.1” prototyping grid with big pads
- Comes with both stacking and plain header, choose whichever you want while soldering together
- An IC pattern for adding a DIP IC up to 20 pins
- Power rails down the middle and side
- A reset button and an extra use button
- 2 3mm general use LEDs, red and green, as well as 2 matching resistors
- A pass-thru ICSP stacking header so you can stack any kind of the shield on top, and/or use and AVR programmer
- A surface-mount chip area for up to 14 SOIC size part
- Compatible with tiny breadboards
- Every pin is brought out
- Gold plated pads
- 2 x 0.1uF ceramic capacitors on either side for extra power stability
SKU: BDA-002
There are no reviews yet.