5.5mm DC Power jack Female Power Breakout Module Subtotal: ₹45.00
Sensors and Modules
TP4056 Lithium Ion Battery Charging Board Module
Product Specifications:
| Module | Li-Ion Battery Charging/discharging module |
| Chip | TP4056 |
| Number of cells suitable | Single Cell |
| Dimension | 17mm x 21mm |
| Input Voltage: | 4.5V to 5.5V |
| Full Charge Voltage | 4.2V |
| Charging Current | Adjustable 1A |
| Charging Precision | 1.5% |
| Operating Temperature | -10’C to +85’C |
| Application | Portable devices Power back Battery Charger |
₹35.00 (ex. GST)
TP4056 is a Li-Ion charging and discharging module with a micro USB port. The module protects the lithium-ion battery to overcharge and over-discharge. It is a complete constant voltage/current linear charger of a single cell. It monitors the cell during charging and discharging and after a critical value, it disconnects the circuit.
The module features with internal PMOSFET architecture that neglects the use of blocking diode, externally programmable current by using a single resistor, thermal feedback that regulates the charge current to limit die temperature and onboard charging indication.
Features
- Onboard charging indication
- Red light: charging
- Greenlight: fully charged
- Mini USB interface
- Adjustable charging current
- 1% linear charging method
- Suitable for single 3.7V and 18650 cell
Specification
- Input voltage: 4.5V to 5.5V
- Full charge voltage: 4.2V
- Charging current: Adjustable 1A
- Charging precision: 1.5%
- Operating temperature: -10℃ to +85℃
Application
- Portable devices
- Power back
- Battery charger
Based on 0 reviews
Be the first to review “TP4056 Lithium Ion Battery Charging Board Module”
Related products
-
Arduino
Arduino Uno Prototyping Shield with 170 Point Mini Breadboard
Arduino Uno Protoshield directly fits into an Arduino UNO board and breaks out the I/O pins and makes it an expansion board. It makes it very easy to design any customer circuit. You can directly solder components on the board or connect the circuit using 170 point mini breadboard (included). The board is designed to solder both through-hole and SMD components to test them with your Arduino board. Although the SMD area is designed for 24 Pins SOIC integrated circuit and has a lot of space for TH components.
Features
- It has a standard 0.1” x 0.1” prototyping grid with big pads
- Comes with both stacking and plain header, choose whichever you want while soldering together
- An IC pattern for adding a DIP IC up to 20 pins
- Power rails down the middle and side
- A reset button and an extra use button
- 2 3mm general use LEDs, red and green, as well as 2 matching resistors
- A pass-thru ICSP stacking header so you can stack any kind of the shield on top, and/or use and AVR programmer
- A surface-mount chip area for up to 14 SOIC size part
- Compatible with tiny breadboards
- Every pin is brought out
- Gold plated pads
- 2 x 0.1uF ceramic capacitors on either side for extra power stability
SKU: BDA-002 -
-
There are no reviews yet.